Sequel 2326 NAT thermoplastic polyolefin material is typically used for molded-in-color automotive interior applications that require energy-management properties.
Sequel 2326 NAT
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 15 g/10 min |
| Density (23 °C) | 0.95 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 1150 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 18.6 MPa |
| Charpy Impact Strength - Notched (23 °C) | 78 kJ/m² |
| Charpy Impact Strength - Notched (-40 °C) | 6.5 kJ/m² |
| Multi-axial Impact Strength (23 °C, 6.6 m/s, 3.2 mm plaque) | 20 J |
| Multi-axial Impact Strength (-30°C, 6.6 m/s, 3.2 mm plaque) | 25 J |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 75 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 54 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications